Find your CAN-Bus

CAN-Bus connector location - pictures by model

K1600

K1600GT

Compartment under pillion seat
k1600_wider2_arrow
Remove seats
k1600_plugged-in_arrow
The alarm connector (DWA) is situated under the rear cowling
K1600_unplugged_arrow
The alarm connector (DWA) unplugged
k1600-battery
Your battery is located under the rider’s seat.

R1200GS LC (K50 & K51)

R1200GS Adventure (K50)

RDC_1200_GS
Open the compartment under pillion seat
rdc_r1200LC_wide
Look inside, towards the rear, of the area under the pillion seat
rdc_1200GS
RDC connector plugged in
IMG_0007_dont
DO NOT confuse the RDC connector with the ABS tilt sensor!

R1200RT LC (K52)

IMG_0025_RDC_arrow
RDC connector is located under the rear cowling.
IMG_0029_rdc_arrow
Remove the seat to reach the RDC.
IMG_0033_rdc_arrow
Look underneath the cowling.
IMG_0029_not_here
Do not confuse the RDC and the ABS tilt-sensor.

R1200RS LC (K54)

IMG_0055_rdc_arrow
The R1200RS RDC connector is underneath the pillion seat.
IMG_0056_OEM_wide
Look towards the front of the bike, on the left side, hidden under the cowling, you will find the RDC connector.
IMG_0057_correct
The RDC connector is hidden from plain sight.

HEX_ezCAN_installed_on_2016_BMW_R1200RS

HEX_ezCAN_Socket_Location

R1200R LC (K53)

IMG_0074_rdc_arrow
Remove the pillion seat to reach the RDC.
IMG_0075_arrow
After removing the pillion seat, look under the cowling towards the front of the bike.
IMG_0078_arrow
This is what the RDC plug looks like.