Step 3C of the HEX ezCAN PURE Software Download & Configuration Guide contains the Extra Settings by make and model list.
If you can’t find your vehicle listed in Extra Settings by make and model, there’s an excellent chance you may be the first person to install a HEX ezCAN PURE on your particular vehicle.
In this case, be a Superstar! Help out everyone who installs on the same model in future by sharing your own Extra Settings adjustments.
Here’s how to do it:
The HEX ezCAN PURE Universal Accessory Manager raises the game by allowing near plug-&-play levels of convenience both for vehicles on which essential CAN-bus data is not present, and for vehicles that do not use CAN-bus communication at all. It is a universal-fit product designed to work with a wide range of 12V motorcycles.
However, universal products are not guaranteed to be compatible with every vehicle. Successful installation requires access to specific trigger signals, including high beam, ignition, indicators, brake and horn. Some modern motorcycles utilise digital control systems where certain functions — such as high beam and/or brake lights — are operated via digital communication signals rather than traditional on/off trigger wires. In such cases, the required analogue trigger signals may not be accessible.
Before purchasing or installing the HEX ezCAN PURE, please consult your motorcycle’s owner’s manual and carefully review the product specifications and installation requirements to ensure compatibility with your vehicle.
The HEX ezCAN PURE uses three-pin Sumitomo MT connectors (below) with the following components:
The specifications of all wiring are given below.
You can only switch auxiliary front lights on and off, and adjust their light levels while the vehicle is moving, if you have installed and configured an ezBUS-Certified Accessory that allows you to do so.
Currently, the following ezBUS-Certified Accessories allow you to adjust auxiliary front light levels on the move:
For detailed instructions on how to operate front auxiliary lights on the move (including turning the lights on and off, adjusting light intensity levels, temporarily switching off all front and rear lights, and strobing front auxiliary lights when the bike’s ‘Flash-to-pass’ button is pressed), refer to the Operating auxiliary front lights section of the HEX ezCAN User Manual. You can download the user manual at the Software page from this link.
Model-specific HEX ezCANs allow different light levels for day and night running, and include the daytime Modulation feature for front auxiliary lights. On the relevant HEX ezCANs, the ability to collect CAN-bus data from the motorcycle’s ambient light sensor or clock makes this functionality possible.
The HEX ezCAN PURE is designed specifically for fitment to vehicles on which essential CAN-bus data is not present, and for vehicles that do not use CAN-bus communication at all. This means the HEX ezCAN PURE is unable to determine whether it is day or night.
Therefore, the HEX ezCAN PURE does not include day/night light level and Modulation functions.
A generic input harness is included with the HEX ezCAN PURE. However, for quicker, easier fitment to selected motorcycle models, a range of model-specific plug-&-play input harnesses are also available.
Click a link below to read more about the plug-&-play input harness for your motorcycle model:
You will now be redirected to our primary website to view our Privacy Policy
You will now be redirected to our primary website to view our Legal Information
You will now be redirected to our primary website to view our Legal Information