HEX ezCAN Overview

HEX ezCAN Gobi for KTM

Features

The Hex ezCAN Gobi for KTM is a compact, versatile electronic accessory manager with the following features:

  • Created specifically for 1290, 1190, 1090, 1050, 890 and 790-engined KTM motorcycle models
  • 30 Amp total current handling capacity
  • Four highly configurable power output circuits
  • Included HEX ezBUS functionality lets the white output circuit accommodate up to 15 low-powered 'smart' accessories, increasing the maximum number of allowed accessories to 18
  • Connection to the motorcycle’s CAN-bus data line through the diagnostic connector
  • Rugged dust-resistant and water-resistant design

Supported Models

HEX ezCAN Gobi for KTM is specifically designed to accommodate the following motorcycle models:
  • All 1290 models (2021 onward)
  • All 890 models (2020 onward)
  • All 790 models (2018-2020)
  • Model-year compatibility is subject to usage of the correct diagnostic connector adaptor. Read the product overview page for more information.
ezCAN_pack_Gobi
Hex_ezCAN_Gobi_for_KTM_Post2024_LR

Extended model support using a HEX Adaptor

IMPORTANT: The HEX ezCAN Gobi for KTM includes a JWPF-to-Euro 5 adaptor as standard. If you replace this adaptor with an optional HEX JWPF-to-HMS adaptor, the HEX ezCAN Gobi for KTM also supports the following KTM models:

  • All 1290 models up to 2020
  • All 1190 models
  • All 1090 models
  • All 1050 models
  • All 790 models equipped with HMS-type diagnostic connector

Limited Functionality for some Models

Due to wiring harness limitations on KTM 790 and 890 models, these models have the following functionality restrictions:

  • Auxiliary brake lights activate on front brake usage only.
  • Front auxiliary lights cannot be toggled on and off using the bike’s handlebar-mounted controls. For workarounds and auxiliary light hardware control options, refer to the Operating auxiliary front lights section of the HEX ezCAN User Manual. Download the manual from this page.
  • HEX ezCAN functionality that depends on turn signals is not available.
  • HEX ezCAN functionality that switches off or flashes auxiliary front lights on turn signal activation is not available.
  • Support for Run/Brake/Turn signal functionality is not available.
  • Support for heated gear is not available.

The next adventure's only a step away

Which direction will you take?

Find a Distributor

Buy a HEX ezCAN Gobi for KTM from your local HEX distributor?
View Distributors

Get One Now!

Buy a HEX ezCAN Gobi for KTM from the HEX online store?
Shop Now

Installation Guide

How to install the HEX ezCAN Gobi for KTM on your motorcycle?
View Guide

Please note !

You will now be redirected to our primary website to view our Privacy Policy

TAKE ME THERE

Please note !

You will now be redirected to our primary website to view our Legal Information

TAKE ME THERE

Please note !

You will now be redirected to our primary website to view our Legal Information

TAKE ME THERE