HEX ezCAN Yari for Yamaha

Features

The Hex ezCAN Yari for Yamaha is a compact, versatile electronic accessory manager with the following features:

Created specifically for Yamaha Ténéré 700 motorcycle models manufactured between 2019 and 2024
30 Amp total current handling capacity
Four highly configurable power output circuits
Included HEX ezBUS functionality lets the white output circuit accommodate up to 15 low-powered 'smart' accessories, increasing the maximum number of allowed accessories to 18
Connection to the motorcycle’s CAN-bus data line through the diagnostic connector
Rugged dust-resistant and water-resistant design

HEX ezCAN Yari for Yamaha is specifically designed to accommodate the following motorcycle models:

Yamaha Ténéré 700 (Euro 4 & Euro 5) (2019-2022)
Yamaha Ténéré 700 Rally Edition (Euro 4 & Euro 5) (2020-2022)
Yamaha Ténéré 700 World Raid (colour TFT) (2022-2024)
Yamaha Ténéré 700 (colour TFT) (2023-2024)
Yamaha Ténéré 700 Rally Edition (colour TFT) (2023-2024)
Yamaha Ténéré 700 Extreme Edition (colour TFT) (2023-2024)
Yamaha Ténéré 700 Explore Edition (colour TFT) (2023-2024)

IMPORTANT: Due to changes in CAN-bus configuration, Ténéré 700 models made after 2024 are not supported by the HEX ezCAN Yari for Yamaha.
Models from 2025 onward are supported by the HEX ezCAN PURE. Click here to see how a HEX ezCAN PURE with plug-&-play input harness can enhance your 2025-onward Ténéré 700.

Due to CAN-bus and wiring harness limitations on Ténéré 700 models, the following functions are not available:

The Ténéré 700’s CAN-bus does not transmit turn signal data. This has the following consequences:
- Auxiliary front lights cannot be dimmed, turned off or flashed in tandem with active turn signals.
- Run/Brake/Turn signal functionality is not supported (however, auxiliary rear/brake light functionality is supported).
The CAN-bus does not include ambient brightness data, meaning the motorcycle has no day/night brightness differentiation (affects some auxiliary front light functions)
Heated gear cannot be controlled using the Ténéré 700’s factory heated grip controls.