HEX ezCAN for KTM

Domande frequenti

HEX ezCANs have been developed for a selection of controller area network (CAN-bus)-equipped KTM motorcycles.

Click here to see the current list of KTM motorcycles for which HEX ezCANs have been developed.

Previously, two different ezCANs were available for KTM:

  • HEX ezCAN Gobi per KTM, progettato specificamente per i modelli KTM più recenti.
  • The HEX ezCAN for KTM, designed specifically for earlier KTM models.


In February 2025, the HEX ezCAN JWPF-to-HMS Adapter Cable, was introduced, allowing the ezCAN Gobi for KTM to interface with all earlier KTM models previously covered by the ezCAN for KTM. As a result, the ezCAN Gobi for KTM has replaced the ezCAN for KTM.

The HEX ezCAN II for KTM and HEX ezCAN Gobi for KTM always use three-pin Sumitomo MT connectors (below).

I connettori Sumitomo MT sono assemblati con i seguenti componenti:

  • Connettore maschio Sumitomo MT:
    • Spina: 6187-3232
    • Terminale: 1500-0105
    • Sigillo metallico: 7160-8234
  • Connettore femmina Sumitomo MT:
    • Presa: 6180-3242
    • Terminale: 1500-0110
    • Sigillo metallico: 7160-8234

Attenzione!

Verrai ora reindirizzato al nostro sito web principale per visualizzare la nostra Informativa sulla privacy.

Attenzione!

Verrai ora reindirizzato al nostro sito web principale per visualizzare le nostre Informazioni legali.

Attenzione!

Verrai ora reindirizzato al nostro sito web principale per visualizzare le nostre Informazioni legali.