ezCAN PURE Extra Settings starting adjustments

HEX ezCAN PURE Extra Settings starting adjustments

The ezCAN PURE Extra Settings window contains controls to adjust the operating voltage thresholds and inversion settings for the HEX ezCAN PURE’s control inputs. If you don’t know how to adjust these values, or need a quick knowledge source, refer to the Extra Settings by make and model table for your specific vehicle below.

IMPORTANT: All values in this section must be regarded as a starting point only, and may have to be adjusted.

How do I reach the Extra Settings window?

Ouvrez la fenêtre ezCAN PURE Extra Settings(Paramètres supplémentaires ezCAN PURE) du logiciel de configuration HEX ezCAN en suivant les étapes suivantes :

1. Cliquez sur le bouton du menu hamburger dans le coin supérieur droit de l'interface du logiciel de configuration HEX ezCAN (ci-dessous).

2. Click the Device Settings option in the drop-down menu (below).

3. The ezCAN PURE Extra Settings window will be shown. The default view is shown below.

What if my vehicle isn't listed?

If you can’t find your vehicle in the Extra Settings by make and model list below, there’s an excellent chance you may be the first person to install a HEX ezCAN PURE on your particular vehicle.
In this case, be a Superstar! Help out everyone who installs on the same model in future by sharing your Extra Settings adjustments.

Here’s how to do it:

Test all your installed accessories to make sure they work as expected, and adjust your Extra Settings until they work perfectly.
Send an Email to support@hexecan.com, with the subject line My ezCAN PURE Extra Settings. Include all the following information:
- The make, model, and model year of your vehicle.
- The voltage registered on your multimeter when the multimeter probes are touched to your battery terminals, and:
  - The engine is running.
  - The headlight is active.
- The voltage registered on your multimeter when the engine has not been run for at least 30 seconds, and:
  - The ignition switch is ON.
  - The kill switch in the RUN position.
  - The multimeter probes are touched to your battery terminals.
- All five of your chosen Voltage Threshold settings.
- Your chosen horn inversion setting.
- Your chosen high beam inversion setting.
Bask in the knowledge that not only are you a Superstar, you are a pioneer!

Extra Settings by make and model

BMW Moto

G650GS / G650GS Sertão (2011-2015)