If you can’t find your vehicle in the Extra Settings by make and model list below, there’s an excellent chance you may be the first person to install a HEX ezCAN PURE on your particular vehicle.
In this case, be a Superstar! Help out everyone who installs on the same model in future by sharing your Extra Settings adjustments.

Here’s how to do it:

1. Test all your installed accessories to make sure they work as expected, and adjust your Extra Settings until they work perfectly.
2. Send an Email to support@hexecan.com, with the subject line My ezCAN PURE Extra Settings. Include all the following information:
   • The make, model, and model year of your vehicle.
   • The voltage registered on your multimeter when the multimeter probes are touched to your battery terminals, and:
     • The engine is running.
     • The headlight is active.
   • The voltage registered on your multimeter when the engine has not been run for at least 30 seconds, and:
     • The ignition switch is ON.
     • The kill switch in the RUN position.
     • The multimeter probes are touched to your battery terminals.
   • All five of your chosen Voltage Threshold settings.
   • Your chosen horn inversion setting.
   • Your chosen high beam inversion setting.
3. Bask in the knowledge that not only are you a Superstar, you are a pioneer!